Rihui welds are specified on engineering and fabrication drawings

Ceramic Welding Backing | Ceramic Backing Welding| Ceramic Backing Taps

When welds are specified on engineering and fabrication drawings, a cryptic set of symbols issued as a sort of shorthand for describing the type of weld, its size, and other processing and finishing information. The purpose of this page is to introduce you to the common symbols and their meaning. The complete set of symbols is given in a standard published by the American National Standards Institute and the American Welding Society: ANSI/AWS A2.4, Symbols for Welding and Nondestructive Testing.
The structure of the welding symbol
The horizontal line--called the reference line--is the anchor to which all the other welding symbols are tied. The instructions for making the weld are strung along the reference line. An arrow connects the reference line to the joint that is to be welded. In the example above, the arrow is shown growing out of the right end of the reference line and heading down and to the right, but many other combinations are allowed.
Quite often, there are two sides to the joint to which the arrow points, and therefore two potential places for a weld. For example, when two steel plates are joined together into a T shape, welding may be done on either side of the stem of the T.

Date: 2023-04-10     hits: 628    Return