The type of flux (acid neutral basic).
The welding speed affects the penetration and the width of the weld (the cross-
sectional area of the weld). A high speed produces a narrow weld with little penetration.
An excessively high speed produces a risk of undercutting, pores, root defects, poor
fusion and magnetic blow effect. Too low a speed results in an uneven surface, while
extremely low speed produces a mushroom-shaped penetration, and can result in
thermal cracking. In addition, it produces a large weld pool, which flows round the arc
and results in an uneven surface and slag inclusions.
Supplied By RIHUI Ceramic Welding Backing
Date: 2023-04-10 hits: 607 Return
Spot welding ( Ceramic Backing) 2023-04-10
Ultrasonic welding( RIHUI Backing) 2023-04-10
Spot welding( RIHUI Ceramic Welding Backing) 2023-04-10